26FT D-Shaped EPDM Weather Stripping, 3/4 x 3/8 Inch

Product OverviewALVOTREX D-shaped weather stripping is a universal, cut-to-fit sealing strip for projects that use an adhesive-backed hollow profile. The roll measures 26 ft (about 7.92 m), with a 3/4 in (19 mm) base width and 3/8 in (10 mm) overall height.How It WorksThe hollow D profile compresses as a door, lid, hatch, window, or access panel closes. When correctly matched to the gap, it helps limit drafts, dust, incidental splashes, vibration, rattling, and closing contact noise. Flexible black EPDM foam follows straight runs and gentle curves and cuts to length.Application IdeasMeasured applications may include home door and window frames, garage-door side or frame gaps, RV and enclosed-trailer compartments, automotive openings, truck caps and storage boxes, marine hatches, cabinets, equipment enclosures, and machinery covers. This is a universal profile, not a molded vehicle-specific replacement.Installation NotesMeasure the mounting width and compression gap before ordering. Remove old material and residue. Clean and fully dry the surface, then test-position the strip. Peel the red liner gradually, place the seal without stretching, and press firmly along the bond line. Avoid closing or loading it immediately; allow the adhesive time to set. Adhesion varies with surface condition, coating, temperature, moisture, and contamination.Package ContentsOne continuous 26 ft black self-adhesive D-shaped EPDM foam seal. Scissors, cleaner, primer, and installation tools are not included.Important NotesThe 0.118 in (3 mm) image callout appears to indicate the base/tape area, but its exact reference point is unconfirmed; use the verified 19 x 10 mm overall profile for purchase decisions.About ALVOTREXPractical replacement parts and maintenance supplies for everyday projects

• Check The Size First: This universal D-shaped seal measures 3/4 in wide x 3/8 in high (19 x 10 mm) and is 26 ft long. Measure the mounting surface and closing clearance before ordering; it is not a vehicle-specific molded seal
• Seal Everyday Gaps: The hollow D profile compresses between two closing surfaces to help limit drafts, dust, splashes, rattles, and contact noise around doors, windows, lids, hatches, and access panels when correctly sized and installed
• Flexible EPDM Construction: Black EPDM foam bends around gentle curves and the hollow chamber cushions closing contact. Use it as replacement weather stripping where a 3/4 x 3/8 in adhesive-backed D profile matches the original space
• Prepare, Position, And Press: Remove old residue, clean and fully dry the surface, test the route, then peel the red liner a little at a time. Apply without stretching, press firmly along the full length, and allow the adhesive time to set
• One Cut-To-Fit 26FT Roll: Trim the continuous strip for home doors and windows, RV or trailer compartments, automotive openings, truck caps, marine hatches, toolboxes, cabinets, and equipment covers; verify dimensions for each project