60 Piece Metal Drywall Anchors Kit with Screws and Hooks

Most wall anchors make you drill first: measure a bit, drill a pilot hole, vacuum the dust, push in a plastic sleeve, and hope the hole is not too big. The FELUBAM 60 Piece Drywall Anchors Kit skips all of that. HOW IT WORKS: each zinc plated carbon steel anchor goes in with its wings closed. 1. Mark the spot. 2. Tap the anchor in with a hammer until the flange sits flush; the steel point forms its own opening. 3. Drive in a screw or hook, and the screw spreads the wings open behind the panel so solid metal braces against the back of the board. WHAT YOU CAN HANG: framed photos, posters, canvas prints, small clocks, string lights, calendars, and keys on drywall, plasterboard, gypsum board, and hollow walls; the hooks also work on a drywall ceiling for paper lanterns or garland. This kit is made for light loads only, so keep loads light and do not over tighten. IN THE BOX: 30 anchors, 25 M4 x 30 mm screws, 5 hooks.

• Complete 60 Piece Kit: 30 metal drywall anchors, 25 M4 x 30 mm screws, and 5 hooks, enough to put up a whole gallery wall or a season of decor from one box
• Skip the Power Drill: unlike traditional plastic anchors that need a drilled pilot hole, this anchor taps straight into drywall with a hammer, with no drilling dust
• Skips the Hole Guesswork: the steel point forms its own opening as you tap the anchor in, helping you avoid the oversized or crooked holes a drill bit can leave
• Steel Wings Lock It In: driving the screw spreads the wings open behind the panel, bracing solid metal against the back of the board instead of relying on a plastic sleeve
• Light Duty on Purpose: for framed photos, posters, string lights, small clocks, and keys on drywall, plasterboard, and hollow walls or ceilings; keep loads light and do not over tighten